Physical properties ：
Light brown transparent liquid, crystallization temperature ≤-15℃.
Packaging and storage：
Sealed packaging in plastic drums, net weight 25kg or 1000kg. Please store in a ventilated and cool place, avoid direct sunlight, and prohibit open flames.
It is strictly forbidden to directly mix with resin to avoid explosion accidents.
Please wear labor protection equipment when using it. If come into direct contact with your body, please immediately wash it with clean water and receive medical treatment if necessary.
Specifications/Model：
|
MODEL |
Density g/cm3 |
Viscosity mpa.s≤ |
Acidity in sulfuric acid % |
Free sulfuric acid %≤ |
Applicable sand temperature range℃ |
Applicable scope |
|
RHG-04 |
1.10-1.15 |
10-15 |
25 |
4-6 |
25--30 |
Gray Ductile Iron Casting |
|
RHG-03 |
1.15-1.18 |
15-18 |
30 |
6-8 |
20-25 |
Gray Ductile Iron Casting |
|
RHG-O9 |
1.16-1.20 |
16-20 |
35 |
8-9 |
15-20 |
Gray Ductile Iron Casting |
|
RHG-10 |
1.25-1.30 |
20-25 |
40 |
9-11 |
0-10 |
Gray Ductile Iron Casting |
|
RHG-12 |
1.30-1.35 |
20-25 |
45 |
12-14 |
below zero 5-10 |
Gray Ductile Iron Casting |
|
RHG-16 |
1.35-1.40 |
25-30 |
50 |
16-18 |
below zero 10-15 |
Gray Ductile Iron Casting |
|
RHG-AZ |
1.35-1.40 |
20-25 |
Special for AB curing agent intelligent controller |
Cast steel special |
||
|
RHG-BZ |
1.15-1.20 |
10-13 |
||||
|
RHG-A |
1.16-1.20 |
16-20 |
Gray Ductile Iron Casting |
|||
|
RHG-B |
1.10-1.15 |
10-13 |
||||
AB Curing Agent Intelligent Controller:
(1) Keep the demoulding time constant: within the sand temperature 0-60 ℃, to achieve a constant mold release. Reduce head and tail sand.
(2) The curing speed and the amount of addition are automatically adjusted according to the sand temperature and weather temperature.
(3) Only high and low acidity sulfonic acid curing agent are needed throughout the year, which is convenient for production management.
(4) Optimize the resin sand process: maintain the best ratio of curing agent, give full play to the effectiveness of the resin, reduce the amount of addition, improve the quality of the core, reduce casting waste, and increase economic benefits.
(5) The addition amount of resin and curing agent, the flow rate of sand realize the screen display more intuitively.
(6) Realize one-click conversion of resin addition amount of molding sand backing sand and surface sand, easy to operate, economical and practical, reduce resin addition amount.
Qilu Chemical Industrial Park (Dongchang District), Zibo City, Shandong ProvinceSouthern Industrial Zone (South factory area) of Zhangdian District, Zibo City, Shandong Province
